Monday 4 April 2011

Ar-15/M16 Ta648 Red Chevron Acog Scope 6x48

Increase your long-range target identification and hit probability.


Fully Assembled ACOG/Reflex Tactical Sighting System Ready To Clamp On Your Flattop


Complete, fully assembled tactical sighting system comes ready to install on a flattop AR-15/M16/M4 rifle and equips you to engage targets at almost any range. The kit is built around the combat-proven ACOG scope for long-range targets, and a Trijicon RM01 RMR (Ruggedized Miniature Reflex) dot reflex sight for heads-up engagement of close-in targets. Also includes a minimal-profile mount that secures the red dot to the top of the ACOG, and the correct Picatinny mount for installing the ACOG on a flattop upper receiver.


CLICK HERE for more Trijicon OPTICS


TA33H-RMR - Contains a 3 x 30 ACOG with an amber "upside down horseshoe" reticle ballistic compensated for rifles chambered in .223/5.56mm, RM01 RMR sight with a 4 MOA LED red dot, and a rugged TA60 mount that clamps to any Picatinny flattop rail. TA33H ACOG offers a battery-free dual-illumination system that combines powerful fiber optics with Tritium for a reticle that's visible in any light conditions from bright sunlight to total darkness.




Trijicon ACOG®
The ACOG’s are internally-adjustable, compact telescopic sights with tritium illuminated reticle patterns for use in low light or at night. Bindon Aiming Concept (BAC) models feature bright daytime reticles using fiber optics which collect ambient light. The ACOG’s combine traditional, precise distance marksmanship with close-in aiming speed. Although the ACOG’s have many features which are very advantageous for military use, they were developed by Trijicon without government funding. Every feature of its mechanical and optical design was chosen for a single purpose: to provide increased hit potential in all lighting conditions -- without failure-prone batteries.



CLICK HERE for more Trijicon OPTICS

Designed to fulfill the requirements of military and law enforcement precision shooters for outstanding long-range target identification and hit probability. Features ample 6x magnification superb lens clarity unbeatable low-light capability and Bindon Aiming Concept (BAC) for fast both-eyes-open aiming. Manual override lets you adjust reticle brightness by rotating the sleeve on the rear eyepiece. The bright red chevron (upside down "V") reticle aids in fast instinctive target acquisition with additional bullet drop compensated (BDC) estimated aiming points marked in 100 meter increments starting at 400 meters. .223/5.56 model is calibrated for U.S. military M855 cartri Mfg: Trijicon SPECS: Forged 7075-T6 aluminum housing matte black anodized; coated lenses. Approximately 9" (22.9cm) long. 36 oz. (1 021 g) weight. 6x magnification 48mm objective lens. Adjustable for windage and elevation. Includes TA75 rail adapter Pelican hardshell carrying case

Friday 4 March 2011

Video On TRIJICON ACOG System

Interview with Tom Munson


Which Acog sytem is best for you



Which Reticle is best for you

Video On TRIJICON ACOG System

Interview with Tom Munson


Which Acog sytem is best for you



Which Reticle is best for you

Tuesday 1 March 2011

Advanced Combat Optical Gunsight


Advanced Combat Optical Gunsights (abbreviated ACOG) are a series of telescopic sights manufactured by Trijicon. The ACOG is designed to be used on the M16 rifle and M4 carbine, but Trijicon has developed ACOG accessories for certain other firearms. Models provide fixed power magnification levels from 1.5x to 6x.[1]
Unlike many reflex sights, the ACOG does not require battery power. The superimposed reticle, available in a variety of patterns and colors, is illuminated by an external fiber optic light-gathering rail when available light is plentiful and by an internal tritium lamp during low-light use.

The ACOG is available in a variety of configurations from the manufacturer with different reticles, illumination, and other features. The TA01NSN features 4xmagnification and a crosshair reticle with a bullet drop compensator that allows the operator to engage targets out to 600 m (2,000 ft) without adjustments. Its reticle glows amber in darkness. It also incorporates rudimentary ghost ring iron sights as a backup for targets that are within 50 m (160 ft), but it is only usable when mounted on the carrying handle. The TA31RCO has 4x magnification, no iron sights, and uses a red chevron reticle which automatically adjusts to the ambient light conditions and has a bullet drop compensator that allows engagements at up to 800 m (2,600 ft). The M150 adds flip caps and is waterproof up to 11 m (36 ft). All ACOGs do not use batteries and are designed to be usable in any lighting. Features on other ACOGs include Docter reflex sights mounted on top, Picatinny rails, and mounted Trijicon red dot sights.
Although the ACOG is designed for the Picatinny rail of the M16A4 and M4, it can be mounted on the carrying handles of previous models.
Trijicon later began producing ACOG mounts and adapters for weapons besides the M16, including the Beretta AR70/90 series; SIG SG 550Heckler & KochBushmaster ACR, and FN SCAR weapon systems; and the Steyr AUG

Wednesday 16 February 2011

Acog 6 X 48 Machine Gun Optic Dual Illuminated Chevron .223 Ballistic Reticle

Acog 6 X 48 Machine Gun Optic Dual Illuminated Chevron .223 Ballistic Reticle
The militarys need for a magnified, self-luminous tactical sight that enhances target identification and increases hit probability on extended-range shots has given rise to the new Trijicon ACOG 6x48. Powered by Trijicons patented fiber optics and tritium-based technology, the TA648RMR-308 ACOG reticle features a red chevron aiming point. It also incorporates a bullet drop compensator (BDC) with additional aiming points estimated for trajectory of the 7.62mm M80 out to 1200 meters. To further improve target acquisition and hit potential, the ACOG 6x48 incorporates Trijicons Bindon Aiming Concept (BAC) a revolutionary both-eyes-open method of aiming.

Like other members of the Trijicon ACOG line, the ACOG 6x48 is battery free and waterproof to 500 feet.

This model of the 6x48 ACOG features an 8.0 MOA RMR.

The TA648RMR-308 also includes:

- 1 8.0 MOA RMR Sight (RM02)
- 1 Picatinny Rail Adapter (TA75)
- 1 LENSPEN (LENSPEN)
- 1 Trijicon Logo Sticker (PR15)
- 1 Manual
- 1 Warranty Card

Specifications:

- Magnification: 6.0
- Objective Size: 48.0
- Bullet Drop Compensator: Yes
- Length (in): 9.00
- Weight (oz): 39.3 w/out RMR
- Illumination source: Fiber Optics & Tritium
- Reticle Pattern: Chevron w/ Target Reference System
- Day Reticle Color: Red
- Night Reticle Color: Red
- Calibration: 0.308
- Bindon Aiming Concept: Y
- Eye Relief (in): 2.70
- Exit Pupil (mm): 8.00
- Field of View (): 3.30
- Field of View @ 100yrds (ft): 17.00
- Adjustment @ 100 yds (clicks/in): 4.0
- Mount: TA75
- Mount On/Comes With: TA75
- Housing Material: Forged Aluminum

Price:


Click here to buy from Amazon

Tuesday 11 January 2011

ACOG 6x48 Red Chevron .308 w/TA75

ACOG 6x48 Red Chevron .308 w/TA75Red Chevron Reticle Tube: 1in Reticle: Red Chevron Fixed Power Color:Black The new 6x48 riflescope incorporates a bullet drop compensator (BDC) with additional aiming points estimated for trajectory of the 7.62mm M80 out to 1200 meters. It also features Trijicons Bindon Aiming Concept (BAC) a revolutionary both-eyes-open method of aiming.

Price: $2,100.00


Click here to buy from Amazon